"ネペンテス" ロザリアプロダクト.

2026-07-30

一つのメガネケース、その物語。

T.Oオリジナルのネックメガネケースについて、Rosaria Product.(ロザリアプロダクト)の細野さんに話を伺いました。

時計ベルトから始まったものづくり。T.Oの創業者との出会い。店の家具や照明から受け取った印象。そして、一つのメガネケースを形にするまでに考えたこと。

完成した製品からは見えない、その背景を伺いました。


時計ベルトから始まったものづくり

——まず、Rosaria Product.(ロザリアプロダクト)について教えてください。

ロザリアプロダクトは時計のベルトから始まったブランドです。

時計師の高橋さんと若い頃に出会ったことが、最初のきっかけでした。高橋さんはヴィンテージウォッチを集めていて、その時計の表情や年代、規格、サイズに合わせて、一つひとつベルトを作るようになりました。

既製品のベルトは、量産のために一定の形に整えられています。それに対して、制限を一度取り払い、その時計に合わせて一本ずつ作る。そこがロザリアプロダクトの始まりです。

時計の年代に合わせてヴィンテージのレザージャケットを探し、それを解体してベルトを作ったこともあります。量産とは少し異なる軸でものを作ることが、根底にあります。


T.Oとの出会い

細野さんが初めてT.Oを訪れたのは、2020年1月。時計師の高橋さん、HOMESTEAD代表の入江さんとともに、イベントのため高知を訪れた。

当時、細野さんは医療関係者として業務に従事しながら革製品の製作を続けていた。

——T.Oの創業者について、どのような印象を持ちましたか。

最初に強く印象に残ったのは、お店の照明でした。

僕が伺う前日も、夜中の1時か2時頃まで、店内のレイアウトを変えながら照明の位置を調整していたと聞きました。僕が到着した時も閉店後で、ずっとライトを動かしていました。

そして人としての豪快なパワフルさからは想像ができないほどの繊細な接客。

率直に、すごい人だと思いました。

お客様への対応も、とても細やかでした。接客の考え方や、その仕組みまで含めて徹底されていた。入江さんも、「この接客のマニュアル自体が一つの価値になる」と話していました。

扱っている商品にも驚きました。isabella stefanelliやm.a+のように、作り手の手が強く表れるものが並んでいて、イベントで仕事として訪れているのに、ずっとバッグや革小物を見ていました。

それまで自分が出店してきた店とは、全く異なる世界でした。


独立を決めた夜

初日のイベントでは、細野さんが製作した時計ベルトに多くの反応が集まった。

その日の夜、細野さんは入江さんの部屋を訪れ、医療業界を辞めて独立することを相談したという。

——T.Oでのイベントが、独立のきっかけになったのでしょうか。

はい。自分の作ったものが、これほど受け入れてもらえるということが自信になりました。

その夜、入江さんに「本当に独立しようと思う」と相談しました。「いいんじゃない」と言ってもらって、看護師を辞めることを決めました。

ロザリアプロダクトは自分一人で続けているので、ブランドと自分の人生が重なっている部分があります。

T.Oでのイベントは、自分にとって大切な思い出であり、一つの転機でした。

時計ベルトでは、高橋さんと一緒に仕事をすることが中心でした。今回、革小物という形でT.Oの仕事に携われたことは、また違う意味があります。

最初に伺ってから6年が経ちました。とても感慨深く感じています。


T.Oのための形

今回のメガネケースは、眼鏡を入れたまま首から下げることができる。ストラップは長さを調整でき、簡単に外すことも可能だ。

形の着想には、細野さんがT.Oの店内で見てきたものが関係している。

——この形は、どのように生まれたのでしょうか。

以前から、眼鏡を入れて首から下げられるケースは作りたいと思っていました。いくつか試作もしていました。

ただ、T.Oのために作ると考えた時、店内の家具が強く印象に残っていました。

曲線を描く家具や、店内の光の具合。T.Oは、直線よりもR、つまり曲線を大切にしているのではないかと感じていました。

僕自身の製品でも、曲線は大事にしています。

今回も、その要素を入れたいと思い、アウトラインを何度も修正しました。


曲線について

T.Oの創業者は、生前、「固いものはよくない」と話していた。

それは素材の硬さではなく、硬く見える形や、決まりきった印象を指す言葉だった。

整いすぎたものを、ほんの少し崩す。上質な素材や技術を使いながら、均一に見せすぎない。T.Oが長く扱ってきた服や革製品にも、そうした考え方は通じている。

細野さんは、以前T.Oを訪れた際、創業者から一本のベルトについて声をかけられたという。

——その時のことを覚えていますか。

ウエストベルトを作り始めた頃でした。

創業者から「あのベルト、良いね」と言っていただいたことがあります。見てくださっていたことが意外で、よく覚えています。

そのベルトにはアール・ヌーヴォーの意匠が入っていました。

*アール・ヌーヴォー:19世紀末から20世紀初頭のヨーロッパで広まった、植物など自然の曲線を特徴とする芸術様式。

帰りの飛行機で、あらためてアール・ヌーヴォーについて調べました。アール・デコが幾何学的な形へ向かっていくのに対して、アール・ヌーヴォーには、人の手でしか作れない曲線があります。

「これは機械では簡単に作れないだろう」というような、手仕事の曲線です。

そのことが、今回のアイウェアケースにも残っていたのかもしれません。

マチや外周の線は、100回ほど引き直しました。


シンプルだが、簡素ではない

今回のケースは、一枚の革から作られている。

複数のパーツを縫い合わせるのではなく、1枚の展開図を折り、形を作る。構造だけを見れば簡潔だが、その形を成立させるまでには多くの設計が必要だった。

——製作において、難しかった点はどこでしょうか。

意識したのは、シンプルだけれど、簡素には見えないことです。

市場にある眼鏡ケースはトレンドがあって似た構造のものが多く見つかります。今回は、そこから離れたいと思いました。

一般的なケースは2つのパーツから作られていることが多いのですが、今回のケースに使う抜き型は1つだけです。1枚の革を折って作ります。

製作自体はシンプルです。

ただし、革を効率よく取るという点では、決して合理的なパターンではありません。量産には向いていないと思います。

革製品を作り続けていると、最終的には革工芸のようなところへ戻っていく感覚があります。

一見すると誰にでも作れそうですが、実際には、あえて作る人は少ない形だと思います。

難しい技法を見せるのではなく、普通になりすぎないようにする。そのために、設計には長い時間をかけました。


7度仕上げるコバ

構造が簡潔であるほど、仕立ての精度がそのまま表れる。

今回、ケースのコバは7度にわたり磨き直されている。

——コバを7回仕上げたのですか。

はい。シンプルな構造だからこそ、縫製やコバの仕上がりが大切になります。革工芸のように見えすぎず、一つの製品として成立させるために、仕立てには時間をかけています。


時計ベルトと同じピッチ

縫製は、すべてハンドステッチで行われている。

縫い目の間隔は、ロザリアプロダクトが時計ベルトに用いているものと同じだという。

——ステッチのピッチについて教えてください。

もっと細かく縫うこともできます。

ただ、以前T.Oとバッグについて話した時に、縫い目の間隔を少し広くしたいという話がありました。その感覚を、今回のケースにも取り入れています。

ピッチは、時計ベルトと同じです。

時計ベルトから始まったロザリアプロダクトの仕事が、今回のケースにも自然につながるように考えました。

ミシンであれば数秒で縫える距離ですが、手で縫うと40分ほどかかります。

時間をかけること自体が目的ではありません。

ミシンの縫い目は、一か所が切れると連続してほどけることがあります。ハンドステッチでは、そのリスクを抑えることができます。

長く使うことを考えた時、その違いは大きいと思っています。


首に触れる部分

ストラップにも、目立たない工夫がある。

一般的なストラップでは、断面にあたるコバが首に触れることがある。今回のケースでは、首に当たる側へ革の表面が来るよう、一枚の革を折って仕立てている。

——ストラップの作りも独特ですね。

首に当たる部分については、事前にT.Oから話をいただいていました。

特に女性が使う場合、エッジが首に当たることが気になるかもしれない、と。

そこで、両端がコバになる一般的な仕立てではなく、一枚の革を半分に折り、首に触れる側へ革の銀面が来るようにしました。

厚みも調整し、エッジが立ちすぎないようにしています。中央にステッチを入れ、形を安定させています。

見ただけでは分かりにくい部分ですが、使い心地を考える上では大切なところです。


リザードの中心を取る

サンプルには、黒のリザードレザーが使われている。

リザードは、クロコダイルと同じエキゾチックレザーに分類されるが、斑が細かく、より繊細な表情を持つ。

——リザードを選んだ理由は何でしょうか。

リザードは、クロコダイルに比べて斑が小さく、上品に見える素材だと思っています。

今回のサンプルでは、竹斑(たけふ)と呼ばれる部分が中心に来るように裁断しました。

*「竹斑(たけふ)」は、リザードの背中の中央に一直線に並ぶ、四角く大きめの美しい鱗の部分を指す専門用語。

ケースの正面を見ると、リザードの中心が、製品の中央に来ています。裏側も含め、どちらから見てもできるだけ左右対称になるように取りました。

天然皮革なので個体差はありますが、どこを切り取れば最も美しく見えるかは、裁断の段階から考えています。


光の入り方

平面に置いた状態では、一枚の革で作られた簡潔な形に見える。

しかし眼鏡を入れると、厚みによってマチが開き、ケースの表面に細い光が入る。

——眼鏡を入れた時の形も、設計に含まれていたのでしょうか。

眼鏡を入れると、底から上端にかけて、革の面に少し角度が生まれます。

その角度に光が入り、細い線が出るようにマチを計算しました。

リザードは光を受けた時の表情が特にきれいです。

T.Oで見た照明や、光の当たり方が印象に残っていたので、それを参考にしながら考えました。

光が一本、すっと入るような形になればいいと思っていました。


金具を使わない

今回のケースには、金具が使われていない。

ストラップも革だけで構成され、取り外しや長さの調整ができる。

——長く使うために考えたことはありますか。

革製品は、金具の部分から壊れることが多いと言われています。

今回は、設計の段階から金具を一切使わないことにしました。

10年、20年と使ってもらうこと。可能であれば、その先の世代まで残ることも考えました。

金具を減らすことで、故障のリスクは大きく下げられます。

ハンドステッチを選んだことも同じです。

見た目だけではなく、長く使うために必要な構造として選んでいます。


使い方を限定しない

ストラップは長さを変えることができ、取り外してバッグの中で使うこともできる。

——このケースを選ぶ方へ、伝えたいことはありますか。

一番は、長く使っていただきたいということです。

首から下げることもできますし、ストラップを外して、通常のメガネケースとしてバッグに入れることもできます。

使う方の生活や、その日の服装に合わせて、使い方を変えてもらえればと思っています。

一つの使い方に限定するのではなく、その人に合った形で、一日でも多く使っていただき、できれば世代を超えて受け継いでいってもらいたいです。


ロザリアプロダクトの仕事は、目立つ技術を加えることではなく、形や素材、使う人の身体までを考え、必要な工程を積み重ねることにある。

100回引き直された曲線。

7回磨かれたコバ。

時計ベルトと同じピッチで施されたハンドステッチ。

リザードの中心を取る裁断。

首に触れる側へ革の表面を向けたストラップ。

それぞれは目立たない選択かもしれない。けれど、その一つひとつの積み重ねは狂気的な繊細さで一つのアイウェアケースを形づくっている。

このネックアイウェアケースは、Nepenthes(ネペンテス)と名付けることにした。


Rosaria Product.とAHLEM

約6年前の出会いから始まったご縁が、今回一つの首からかけられるアイウェアケースという形になりました。

ロザリアプロダクトとアーレムは、それぞれ革製品とアイウェアという異なる分野でものづくりを続けています。しかし、流行ではなく、長く使い続けられるものをつくること。一つひとつの工程に時間をかけ、使う人のことを考えながら形にしていく姿勢には、多くの共通点があります。

今回、アーレムトランクショーにあわせて、ロザリアプロダクトのアイウェアケースもご紹介できることを嬉しく思います。この組み合わせもまた、約6年前の出会いから続くご縁と、互いのものづくりへの共感があってこそ実現したものです。

このネックアイウェアケース、ネペンテスは受注にてご注文いただけます。サンプルにはリザードレザーを使用していますが、クロコダイル、オーストリッチ、ガラスレザーなど、お好みの素材でも製作を承ります。

アーレムのアイウェアとともに、ロザリアプロダクトのネペンテスも実際に手に取り、その仕立てや素材、そして背景にある物語を感じてください。

View the NEPENTHES gallery →

*通信販売をご希望の方は下記よりご連絡くださいませ。


Nepenthes by Rosaria Product.
Made to Order

営業時間:10:00 - 18:00(木曜定休)

住所:〒780-0822 高知県高知市はりまや町3-11-17

☎:088-878-1102 ✉:cs@to1981.com

"NEPENTHES" Rosaria Product.

The Story Behind a Single Eyewear Case

For our original neck eyewear case, we spoke with Hosono of Rosaria Product.

We talked about the craft that began with handmade watch straps, his first visit to T.O, the impression left by its furniture and light, and the process of shaping a single eyewear case.

This is the story behind what cannot be seen in the finished piece.

A Practice That Began with Watch Straps

— Could you tell us about Rosaria Product.?

Rosaria Product. began with watch straps.

It started when I met the watchmaker Takahashi. He collected vintage watches, and I began making straps for each one, taking its age, character and proportions into account.

Most ready-made straps are standardised for production. I preferred to set those conventions aside and make each strap for a particular watch. That became the foundation of Rosaria Product.

Sometimes I searched for vintage leather jackets from the same period, taking them apart to make new straps. I've always been drawn to making things outside the logic of mass production.

The First Visit to T.O

Hosono first visited T.O in January 2020, travelling to Kochi with the watchmaker Takahashi and Irie, founder of HOMESTEAD, for a special event.

At the time, he was still working in healthcare while making leather goods.

— What impression did T.O's founder leave on you?

The lighting.

That was the first thing I noticed.

I heard he had been in the shop until one or two in the morning the night before, moving the furniture and adjusting the lights. When I arrived after closing, he was still at it.

What stayed with me most was the contrast.

He had a powerful presence, yet he served customers with remarkable sensitivity.

I remember thinking, simply, this is an extraordinary person.

Everything about his approach felt considered, from the conversation itself to the system behind it. Irie once said that T.O's approach to customer service was valuable enough to become a manual in its own right.

The selection of work surprised me as well. Pieces by Isabella Stefanelli and m.a+ carried such a strong sense of their makers that, although I was there for the event, I spent most of my time looking at the bags and leather goods.

It was unlike any shop I had visited before.

The Night I Decided to Go Independent

On the first day of the event, Hosono's watch straps received an overwhelming response.

That evening, he visited Irie's room and spoke about leaving healthcare to work with leather full-time.

— Was that event at T.O the turning point?

Yes.

The response gave me confidence.

That night I told Irie, "I think I'm really going to do this."

He said, "Why not?"

That was enough.

I left nursing and started Rosaria Product. on my own.

Because I work alone, the brand and my own life have gradually become inseparable.

Looking back, that event at T.O feels like a turning point.

Until then, most of my work had centred on watch straps alongside Takahashi.

Returning to make a leather object for T.O feels different.

A Form Made for T.O

This eyewear case is designed to be worn around the neck with the glasses inside. The strap can be adjusted in length and easily removed when not needed.

Its form was shaped in part by what Hosono had observed inside T.O itself.

— How did this shape come about?

I had wanted for some time to make a case that could hold a pair of glasses and be worn around the neck. I had already made several prototypes.

But when I began thinking specifically about making one for T.O, I kept returning to the furniture inside the shop.

The curved furniture, the way the light falls through the space. I had the sense that T.O values radius and curvature more than straight lines.

Curves are also important in my own work.

I wanted to bring that element into this piece, so I kept revising the outline again and again.

On Curves

During his lifetime, T.O’s founder would often say, “Hard things are no good.”

He was not referring to the physical hardness of a material, but to forms that looked rigid, overly fixed or too resolved.

To take something that feels perfectly ordered and disturb it ever so slightly. To work with fine materials and accomplished techniques without allowing the result to become too uniform.

That way of thinking can also be found in many of the garments and leather goods T.O has chosen over the years.

Hosono recalls that during an earlier visit to T.O, the founder once commented on one of his belts.

— Do you remember that moment?

It was around the time I had begun making waist belts.

The founder said to me, “That belt is good.”

I remember being surprised that he had noticed it at all.

That belt incorporated an Art Nouveau motif.

Art Nouveau was an artistic movement that spread across Europe from the late nineteenth to the early twentieth century, characterised in particular by organic, flowing lines inspired by forms found in nature.

On the flight home, I found myself reading about Art Nouveau again.

Where Art Deco moves towards geometry, Art Nouveau contains curves that seem possible only through the human hand.

Lines that make you think, “A machine probably couldn’t make this so easily.”

Curves born through handwork.

Perhaps something of that stayed with me when I began designing this eyewear case.

I redrew the gusset and the outer contour around a hundred times.

Simple, but Never Plain

The case is made from a single piece of leather.

Rather than stitching together several separate components, one flat pattern is cut, folded and formed into its final shape.

The construction appears concise, but arriving at that simplicity required a great deal of design work.

— What was the most difficult part of making it?

What I kept thinking about was how to make it simple without allowing it to look plain.

There are trends in eyewear cases, and many of the examples on the market share similar structures. I wanted to move away from that.

Most conventional cases are made from two separate parts. This one requires only a single cutting die. It is made by folding one piece of leather.

The act of making it is, in that sense, simple.

But in terms of using the leather efficiently, the pattern is not rational at all. I don’t think it is particularly suited to mass production.

The longer I work with leather, the more I feel that the process eventually brings me back towards something closer to traditional leather craft.

At first glance, it may look like something anyone could make.

In reality, I think very few people would deliberately choose to make it this way.

The aim was never to display difficult techniques for their own sake.

It was to prevent something simple from becoming ordinary.

That is where much of the time went: into the design itself.

It has been six years since that first visit.

I still think about it.

Seven Passes Along the Edge

The simpler the construction, the more the finish shows.

For this case, every edge is polished seven times.

— Seven times?

Yes.

With a simple structure, the stitching and edges matter even more.

The aim was for it to feel like a finished object, not a piece of leather craft. That meant spending time on parts that may never be noticed.

The Same Stitch Pitch as a Watch Strap

Every stitch is sewn by hand.

The spacing is the same as that used on Rosaria Product. watch straps.

— Could you tell us about the stitch spacing?

I could sew more finely.

But when I previously spoke with T.O about making bags, we discussed opening up the spacing slightly. I brought that into this case.

The pitch is the same as on my watch straps.

It connects naturally to where Rosaria Product. began.

A machine could sew this distance in seconds. By hand, it takes around forty minutes.

Time itself is not the point.

If a machine stitch breaks, the seam can continue to unravel. Hand stitching reduces that risk.

Over many years of use, that matters.

Where the Strap Meets the Neck

There is another detail in the strap that is easy to miss.

On a conventional leather strap, the edge may sit directly against the neck. Here, a single piece of leather is folded so that the grain side rests against the skin.

— The strap is constructed in an unusual way.

T.O raised this before I began.

Especially for women, an exposed edge against the neck could become uncomfortable.

So instead of leaving two finished edges exposed, I folded a single piece of leather in half, placing the grain side against the wearer.

The thickness was also adjusted so the edges would not feel too sharp. A central line of stitching keeps the strap stable.

You may not notice any of this by looking at it.

You notice it when you wear it.

Choosing the Centre of the Lizard Skin

The sample is made from black lizard leather.

Its scales are finer than crocodile, giving the surface a more delicate character.

— Why did you choose lizard?

Compared with crocodile, I find lizard finer and more elegant.

For this sample, I cut the hide so that the takefu—the row of larger rectangular scales along the centre of the back—sits at the centre of the case.

In Japanese leatherwork, takefu refers to the distinctive central row of scales running along a lizard's back.

On the front, the centre of the hide aligns with the centre of the case. I treated the reverse in the same way, keeping the pattern as balanced as the individual skin allows.

No two hides are the same.

The decision about where to cut begins before the blade touches the leather.

Designed for Light

When lying flat, the case appears almost deceptively simple—a form cut from a single piece of leather.

With a pair of glasses inside, the gusset opens slightly. The changing angle catches the light, drawing a fine line across the surface.

— Was that part of the design from the beginning?

Yes.

The glasses create a slight angle from the base to the opening.

The gusset was shaped so that light would travel across that surface as a single line.

Lizard leather responds particularly well to light.

I kept thinking about the lighting at T.O and the way it moved through the space.

That memory stayed with the design.

Without Metal Hardware

There is no metal hardware anywhere in the case.

The strap is made entirely from leather, yet can be adjusted or removed with ease.

— What did you consider in terms of longevity?

Leather goods often fail where the hardware does.

So I removed it altogether.

If this piece is still being used in ten or twenty years—or passed on to someone else—that would be enough.

The same thinking led to hand stitching.

They are structural decisions rather than decorative ones.

A Piece That Finds Its Own Place

The strap can be adjusted, removed, or left off entirely.

It can be worn around the neck or carried inside a bag as a conventional eyewear case.

— Is there anything you would like to say to those who choose this piece?

I would simply like people to use it.

Around the neck.

Inside a bag.

However it fits into their day.

I never wanted to prescribe a single way of using it.

Perhaps, one day, it will simply become part of someone's daily life.


Rosaria Product. is not defined by conspicuous techniques.

It is shaped by decisions—about form, material and the body of the person who will use it.

A curve redrawn a hundred times.

Edges polished seven times.

Hand stitching at the same pitch as a watch strap.

A hide cut so that its finest scales sit at the centre.

A strap folded so that the grain side rests against the neck.

Individually, none of these choices seems remarkable.

Together, they become the object.

We have named it Nepenthes.

Rosaria Product. × AHLEM

A friendship that began almost six years ago has taken shape as an eyewear case designed to be worn around the neck.

Rosaria Product. and AHLEM work in different fields—one in leather, the other in eyewear—but they share the same belief: making objects that outlast fashion, giving time to every stage of the process, and making with the user always in mind.

We are pleased to present Nepenthes alongside the AHLEM Trunk Show.

It is a collaboration shaped by years of friendship and a shared respect for craftsmanship.

Throughout the trunk show, Nepenthes will be available to order.

The sample is made in black lizard leather. Crocodile, ostrich and glass leather are also available.

We hope you will experience not only the object itself, but also the decisions that shaped it.

View the NEPENTHES gallery →

For international enquiries, please contact us below.


Nepenthes by Rosaria Product.
Made to Order

Open: 10:00–18:00, Closed Thursdays

T.O
3-11-17 Harimayachō
Kochi 780-0822
Japan

Tel. +81 88 878 1102
Email: cs@to1981.com